UTILITY REAR BLADES
The rear blade leader has a rugged rear blade ready to work for you on 20 HP to 65 HP tractors.
Whether your tractor is 20 HP or 65 HP and you need to build a terrace, dig a ditch, maintain a road, remove snow, or landscape a site, Rhino has a ruggedly-built blade that's right for you. Rhino offers a choice of four series of blades with working widths from 5' to 8' to get the job done. Each series is loaded with user friendly features to reduce your work load. Features including sturdy “A” frames, multiple adjustment settings, precisely-formed moldboards, and easily replaceable cutting edges make Rhino blades the first choice among productive farmers, ranchers, and landscapers year after year. Compare and see the many ways a Rhino rear blade can turn your tractor into a real workhorse.
The 200 Series blade is available in a 5' width and is rated for 2-wheel drive tractors up to 20 HP. The unit features a CAT O hitch with CAT I hitch pins to fit small utility tractors. The formed moldboard is 1/4" x 14" and features a replaceable 3/8" x 3" cutting edge. The moldboard can be offset left or right 10" and, by simply removing a pin, can be pivoted a full 360°. Moldboard tilt is easily accomplished by adjusting the tractor lift arms. The kingpin is 2-7/8" diameter tubing for dependable service. The 200 series is ideal for residential landscaping and gardening or many other small jobs around the farm and home.
The 300 Series blade is available in 5', 6', and 7' widths and is rated for 2-wheel drive tractors up to 35 HP. A CAT I hitch is standard. The 1/4" x 14" moldboard can be offset 12" left or right and features a replaceable 1/2" x 6" cutting edge. The moldboard can be pivoted 360° and tilted up or down easily by relocating the index pins. The kingpin is 2-7/8" diameter thick wall tubing for years of service. The 300 series is ideal for small farm applications, residential road maintenance, landscaping, or small ranching jobs.
The 350 Series blade is available in 6' and 7' widths and is rated for 2-wheel drive tractors up to 55 HP. The 350 features a CAT I hitch and a 5/16" x 16" formed moldboard with a replaceable 1/2" x 6" cutting edge. The moldboard can be offset 12" left or right. Moldboard pivot and tilt are easily adjustable by simply removing index pins. The heavy-duty 2-7/8" diameter tubular kingpin is standard to deliver all available horsepower to the moldboard. Quick-attach end plates and skid shoes are optional equipment. The versatile 350 series blade is ideal for many general farming, ranching, and landscaping jobs.
The productivity and versatility of the 500 Series blade has been proven in the field time after time for over 30 years. The 500 is available in 6', 7', and 8' widths and is rated for 2-wheel drive tractors up to 65 HP. The 500 moldboard can be offset left or right up to 23", pivoted 360°, or tilted up or down 15° by simply relocating index pins. The 2" diameter solid steel kingpin is machined to exacting tolerances to deliver dependable performance year after year. Quick-attach end plates and skid shoes are optional equipment to help add to the versatility of the 500 series blade. The 500 is ideal for farm, ranch, and landscaping applications including ditch digging, farm road maintenance, snow removal, terrace repair, material leveling, and cleaning out feed lots.
The optional quick-attach end plates help turn the 350 and 500 series rear blades into box blades. The end plates can be attached in seconds and are ideal for moving or leveling bulk material. Optional skid shoes are also available on the 350 and 500 series blades to help remove material from prepared surfaces.
The moldboard on all Rhino rear blades can be pivoted a full 360° to handle a range of applications. Reversing the moldboard makes easier work of backfilling or hard-to-reach jobs. It is also ideal for providing a professional finish to road maintenance applications.
The design of the moldboard carrier on the 300, 350, and 500 series blades helps reinforce the moldboard and allows the moldboard to be pivoted and tilted by simply relocating pins. The tilt option is a feature not found on most competitive small blades, making operation of a Rhino blade much easier on the operator. The 500 also features manual offset adjustment.
Features and Benefits
- 4 series to choose from
- Multiple adjustment settings
- Replaceable cutting edges
- 5' to 8' moldboard widths
- Optional skid shoes
|Moldboard Width||5'||5', 6', 7'||6', 7'||6', 7', 8'|
|Cutting Edge||3/8" x 3"||1/2" x 6"||1/2" x 6"||1/2" x 6"|
|Hitch||CAT 0, w/ CAT I pins||CAT I||CAT I||CAT I|
|Maximum Tractor HP - 2-Wheel Drive||20||35||55||65|
|Maximum Tractor HP - 4-Wheel Drive||17||30||47||55|
|Offset (Max.)||10" Left or Right||12" Left or Right||12" Left or Right||23" Left or Right|
|Pivot - Forward||Up to 45°||Up to 45°||Up to 45°||Up to 45°|
|Pivot - Reverse||Up to 30°||Up to 30°||Up to 30°||Up to 30°|
|Tilt- Up & Down||Thru Tractor Lift Arms||Up to 15°||Up to 15°||Up to 15°|
|Weight (Approx.)||5' 156 lbs.||6' 289 lbs.||7' 395 lbs.||8 '430 lbs.|