Rhino

GRADING SCRAPER

GS72

Make your ride smooth sailing by using a Rhino grading scraper to return your driveway or roadway to like new condition.

The Rhino grading scraper cuts material from high spots and deposits it in the low spots, leveling the surface. Available in widths of 60", 72", and 84", this scraper will fit your needs with a minimum number of passes over the surface.

Designed for economical use, the grading scraper only requires 30-50 HP, depending on model. Additionally, heat treated shanks with replaceable hardened tips that can rip down 2-3/8" are standard on every Rhino Grading Scraper!

The offset angled blades use 1/2" x 6" cutting edges that are reversible and replaceable for long life, and the 13-3/4" tall side panels allow for large volume movement of loose material. Full length replaceable wear skids are standard for long life in tough conditions!

Product Uses and Applications

  • Estate
  • Farm
  • Ranch
  • Landscaping
  • Light Commerical

Features and Benefits

  • Smooths gravel driveways, roadways, and parking lots by cutting material from the high spots and moving it to the low spots.
  • Uses two offset angled blades with ½" reversible and replaceable cutting edges for long life
  • Category 1 hitch and quick hitch compatible for easy hook up
  • Tall side panels allow moving large volumes of material without leaving spill out ridges.

Downloads

Specifications

GS60 GS72 GS84 HDGS84 HDGS96
Working Width 60" 72" 84" 84: 96"
Tractor HP 50 -2WD 40 - FWA 50 -2WD 40 - FWA 50 -2WD 40 - FWA 90 - 2WD 72 - 4 WD 90 - 2WD 72 - 4 WD
Blades 2, Angled 2, Angled 2, Angled 2, Angled 2, Angled
Cutting Edge ½" x 6" bolt-on,replaceable,reversible heat treated ½" x 6" bolt-on,replaceable,reversible heat treated ½" x 6" bolt-on,replaceable,reversible heat treated ½" x 6" bolt-on,replaceable,reversible heat treated ½" x 6" bolt-on,replaceable,reversible heat treated
Side Panel Thickness 3/16" 3/16 3/16" 3/16" 3/16"
Skid Shoe ⅜" x 2½" x 46¾" long ⅜" x 2½" x 46¾" long ⅜" x 2½" x 46¾" long 1/2" x 2- 1/2 x 52" long 1/2" x 2- 1/2 x 52" long
Hitch Cat I Std and QH Cat I Std and QH Cat I Std and QH CAT 1 & 2 QH CAT 1 & 2 QH
Front Frame Beam 4" x 4" x 5/16" Wall 4" x 4" x 5/16" Wall 4" x 4" x 5/16" Wall 4" x 4" x 3/8" Wall 4" x 4" x 3/8" Wall
Rear Frame Beam 2½" x 2½" x 3/16" Wall 2½" x 2½" x 3/16" Wall 2½" x 2½" x 3/16" Wall 4" x 4" x 1/4" Wall 4" x 4" x 1/4" Wall
No. Shank Position 3 with Dimpled-on Hardened Tips 3 with Dimpled-on Hardened Tips 3 with Dimpled-on Hardened Tips 3/4" x 2-1/2" x 19 1/8" 4 holes, Heat Treated Plow Point 3/4" x 2-1/2" x 19 1/8" 4 holes, Heat Treated Plow Point
No. of Shanks 4 6 6 6 8
Approximate Weight (lbs) 500 Lbs. 571 Lbs. 642 Lbs. 750 828