Products: Rotary Cutters: Flex-Wing: FN15
|
Rotary Cutters Flex-Wing |
|
|
INTRODUCING THE HEAVIEST-DUTY FLEX-WING ROTARY CUTTER IN THE WORLD… INTRODUCING THE RHINO FLEX 15 NITRO®!
Others may claim to be heavy-duty, but the new Flex 15 NITRO from Rhino® backs it up. From front to rear, on top and underneath, the FN15 is the ultimate premium quality flex-wing rotary cutter.
“The market for a super-duty 15’ flex-wing rotary cutter is very exclusive, and the demands of those in that market are quite high. These customers operate in extreme conditions and they expect a lot from a Rhino. That’s where the NITRO™ and its industry leading 5 inch maximum cut capacity fits in”, according to Tom Taylor, Director of Sales and Marketing at Alamo Group’s Ag Division.
The FN15 features unequaled Cat 6 HD drivelines throughout as standard equipment that are covered by a Two-Year Limited Driveline Warranty. No competitive flex-wing cutter measures up to that. Also standard are the highest rated gearboxes in the flex-wing rotary cutter industry. A massive 325 HP divider gearbox and 285 HP outboard gearboxes far exceed the competition. And it’s not just hype, the gearboxes and their components have been enlarged over previous models to help withstand the greater demands and expectations of NITRO owners. Other improvements made include faster wing blade tip speeds for a better cut and a redesigned center section blade carrier for better blade performance in demanding applications.
Other standard items include a reinforced 7 gauge easy to clean deck, full length wing hinge support for outstanding strength, and front and rear guarding for better operator safety. Optional equipment includes deck rings to help protect the deck from blade damage and a walking axle kit to better fit certain cutting applications.
If you’re looking for the ultimate super-duty flex-wing rotary cutter, look no farther than the Flex 15 NITRO from Rhino! Contact your Rhino dealer today or call 877-408-3297 for more information.
Specifications
| FN15 | |
|---|---|
| Cutting Width | 180" |
| Transport Width | 96" |
| Overall Width | 186" |
| Overall Length | 183" |
| Cutting Height | 1" - 14-1/2" |
| Jack Stand | Std. |
| Hitch | Pull |
| Blade Carrier | Pan |
| Blades | 1/2" x 4": Updraft, Flat, Twisted or 5/8" x 4": Updraft |
| Blade Overlap | 6" |
| Horsepower Required | 60 |
| Gearbox Rating(1) | Power Divider: 325 HP Center & Wing: 285 HP |
| Output Shaft Diameter | 2-9/16"" |
| Blade Tip Speed (Center) | 540 RPM: 13,995 FPM 1000 RPM: 13,709 FPM |
| Blade Tip Speed (Wings) | 540 RPM: 15,162 FPM 1000 RPM: 16,600 FPM |
| Cutting Capacity (Max.) | 5" |
| Driveline Size (Main) | Cat 6 Constant Velocity or Non-CV |
| Driveline Size (Wings) | Cat 4 |
| Driveline Protection | Slip Clutch |
| Deck Thickness | 7 Ga. |
| Side Skirt | 1/4" x 10-1/2" |
| Tire and Wheel | Laminated, Foam-Filled, Used Airplane, Used Airplane Implement, 15" Rim |
| Wing Lift Hydraulics | Std. |
| Wing Flex | 90 Up / 22 Down |
| Safety Tow Chain | Std. |
| Safety Deflectors | Rubber Belting |
| Weight (Approx.) | 5970 lbs. |
RHINO guarantees each piece of Rhino equipment against defective materials and workmanship for a period of one year from the date of delivery to the purchaser unless otherwise specified. RHINO reserves the right to make changes and/or improvements in design and construction of parts or machines shown herein without notice or obligation.
Copyright 2004 RHINO, a member of the Alamo Group Company. RHINO is a registered trademark of Alamo Group, Inc. Terms of Service and Privacy Policy. RHINO; 1020 South Sangamon Ave., Gibson City, IL 60936; Phone 877-408-3297; Fax 877-408-3298