Products: Rotary Cutters: 72"-96" Cut: TW96
|
Rotary Cutters 72-96" Cut |
|
|
The Rhino TW96 makes short work of those larger mowing jobs and is ideal for pasture maintenance, orchard applications, shredding stalks, or cutting material up to 2" in diameter.
The TW96 is available as a three-point lift, semi-mount or pull-type model and 540 or 1000 RPM to fit a wide range of tractors. The center gearbox, ratedS at 120 HP, features 1-3/4" splined input and side drive shafts, and tapered roller bearings for added durability and longer service life. The gearboxes and Cat 4 driveline are protected from sudden shock loads by an adjustable slip clutch on the main driveline and by torque dampeners on both side drives. All Twister® models feature a heavily-reinforced 10 gauge top deck with rounded-edge design for easy clean-up and added strength. Tall, 1/4" thick side skirts and an obstruction-free underside allow high volumes of material to flow easily through the cutting chamber. Standard pan blade carriers, updraft blades, and a 4" blade overlap assure a smooth, even cut.
The TW96 cuts a 97" swath of material. The center gearbox is rated at 120 HP and the outboard gearboxes are rated at 110 HP. All gearboxes feature 1-3/4" splined input shafts and tapered roller bearings for enhanced durability. The pull-type and semi-mount units require only a 30 HP tractor (minimum) and the lift-type unit requires a minimum of a 50 HP tractor (with adequate front weights).
Specifications
| TW96 | |
|---|---|
| Cutting Width | 97" |
| Transport Width | 103" |
| Overall Width | 103" |
| Overall Length (Lift, Semi-Mount) | 101" |
| Overall Length (Pull) | l36",Pull |
| Cutting Height | 1 - 12" |
| Blade Overiap | 4" |
| Jack Stand (Pull-Type) | Std. |
| Hitch (Lift) | CAT II-III and Q.H. |
| Hitch (Pull) | Clevis |
| Hitch (Semi-Mount) | CAT II (Hydraulic Offset Unit) |
| Blade Carrier | Pan |
| HP Required (Lift Min.): | 50 HP |
| HP Required (Semi-Mount Min.): | 30 HP |
| HP Required (Pull Min.): | 30 HP |
| Center Gearbox Rating | 120 HP |
| Outboard Gearbox Rating | 110 HP |
| Output Shaft Diameter | 2" |
| Blade Tip Speed (540 RPM) | 15,218 FPM |
| Blade Tip Speed (1000 RPM) | 16,952 FPM |
| Cutting Capacity (Max.) | 2" |
| Driveline Size | Cat 4 |
| Deck Thickness | 10 Ga. |
| Side Skirts | 1/4" x 9" |
| Replaceable Skid Shoes | Std. |
| Safety Deflector | Std. |
| Weight (Approx.) | 1634 lbs. |
|
Extra Equipment |
Optional Equipment |
|---|---|
|
|
RHINO guarantees each piece of Rhino equipment against defective materials and workmanship for a period of one year from the date of delivery to the purchaser unless otherwise specified. RHINO reserves the right to make changes and/or improvements in design and construction of parts or machines shown herein without notice or obligation.
Copyright 2004 RHINO, a member of the Alamo Group Company. RHINO is a registered trademark of Alamo Group, Inc. Terms of Service and Privacy Policy. RHINO; 1020 South Sangamon Ave., Gibson City, IL 60936; Phone 877-408-3297; Fax 877-408-3298