Products: Rotary Cutters: 72"-96" Cut: TR96
|
Rotary Cutters 72-96" Cut |
|
|
NEW TOUGH 8’ ROTARY CUTTER FROM RHINO
Rhino is proud to introduce the newest addition to their multi-spindle cutter line-up, the Turbo™ 96. This is not your average 8’ cutter. In fact, it would be very difficult to find another 8’ cutter that could equal the ruggedness and performance of the Turbo 96.
“The Turbo 96 is the result of our goal of making a better eight-foot cutter than what was currently on the market”, says Terry Engelke, Rhino Product Manager. The Turbo 96 starts with a patented domed deck. The design incorporates two deck sheets. The lower sheet takes the dents and dings experienced while mowing, and the domed top sheet maintains a “new” look and helps minimize material build up on top.
Cutting and overall performance were a main focus in the design process as well. The deck is a full 1” deeper than previous models to handle larger volumes of material more easily. Also, blade tip speeds are over 10% faster (540 RPM unit) than previous models to ensure a much cleaner cut. The gearboxes and the side drive system were redesigned for more reliable performance. The exclusive 2-1/2” maximum cut capacity rating and the Turbo™ 96’s combination of the 120 HP center and 110 HP outer gearboxes place this machine at the very top of its class in the industry.
The Turbo 96 is available as a 540 or 1000 RPM unit with either a lift, pull, or hydraulically offset semi-mount hitch to best fit a range of tractors and applications. Front and rear safety guarding is standard to improve safety. Visit your Rhino dealer today or call 877-408-3297 to find out more details on the new tough Turbo™ 96 from Rhino.
Specifications
| TR96 | |
|---|---|
| Cutting Width | 97" |
| Transport Width | 104" |
| Overall Length | 101" (Lift, Semi-Mount) 136" (Pull) |
| Cutting Height | 1-1/2" - 12" |
| Self-leveling Height Adjustment | Ratchet Jack or Hydraulic Cylinder (Semi-Mount, Pull) |
| Jack Stand | Std. (Pull) |
| Hitch | CAT II & III QH, CAT II |
| Amount of Offset | Semi-Mount: 11" |
| Blade Carrier | Reinforced Pan |
| Blades | 1/2" x 3-1/2", Updraft |
| Blade Overlap | 4" |
| HP Required(1)(Min.) | 55 (lift), 30 (semi-mount, pull) |
| Gearbox Rating(2) (540 RPM) |
Center: 120 HP Outboard: 110 HP |
| Output Shaft Diameter | 2" |
| Blade Tip Speed | 540 RPM: 17,004 FPM 1000 RPM: 16,821 FPM |
| Cutting Capacity (Max.) | 2-1/2" |
| Driveline Size | Cat 4 |
| Driveline Protection | Slip Clutch |
| Deck Thickness | 10 Ga. (Upper & Lower) |
| Side Skirts | 1/4" x 10" |
| Tire & Wheel | Laminated (Lift, Semi-Mount), Foam-Filled Used Airplane, Used Airplane Implement, 15" Rim (Pull) |
| Safety Tow chain | Std. (Pull) |
| Safety Deflectors | Rubber Belting |
| Weight (Approx.) | 2004 lbs. |
(2)Ratings Based On Actual Field Performance
RHINO guarantees each piece of Rhino equipment against defective materials and workmanship for a period of one year from the date of delivery to the purchaser unless otherwise specified. RHINO reserves the right to make changes and/or improvements in design and construction of parts or machines shown herein without notice or obligation.
Copyright 2004 RHINO, a member of the Alamo Group Company. RHINO is a registered trademark of Alamo Group, Inc. Terms of Service and Privacy Policy. RHINO; 1020 South Sangamon Ave., Gibson City, IL 60936; Phone 877-408-3297; Fax 877-408-3298