Products: Boom Cutters: DB150
| Boom Cutters |
|
|
Over 30 years of hydraulic mower design experience has made the Rhino DB150 the preferred choice of experienced operators for the mowing of pond banks, levees, drainage ditches, and other hard-to-reach areas.
The DB150 can extend to a maximum of 158" from the center line of the tractor, allowing the 60" rotary head to cut areas that are difficult or impossible to reach with ordinary mowers. By being hydraulically driven, maintenance is greatly reduced with the absence of belts and pulleys. The DB150 outperforms many competitive units with smaller hydraulic systems. The DB150 utilizes a 60 gallon hydraulic system which allows the unit to run cooler in tough mowing conditions. The large reservoir also serves as a counterweight and remains stationary on the mainframe, eliminating the potential traffic hazard of a movable counter-balance weight. The DB150 features a heavy-duty three-point hitch using a lower double lug hitch system to fit a wide range of tractors. To help ensure a clean cut, the DB150 features updraft blades and a blade tip speed of 20,028 FPM.
Specifications
| DB150 | |
|---|---|
| Cutting Width | 60" |
| Cutting Height Range | Dependent Upon 3-Pt Lift |
| Cutting Capacity (Max.) | 1" |
| Min. Horsepower Required (with adequate front weights) | 60 HP |
| Overall Width (Head) | 65-1/4 " |
| Overall Length (Head) | 71-3/8" |
| Transport Width | 119" |
| Tractor PTO | 540/1000 RPM |
| Oil Reservoir Capacity | 55 Gal. |
| Total Oil Capacity | 60 Gal. |
| Blade Tip Speed (FPM) | 20,028 |
| Blade Carrier Type | Pan |
| Maximum Reach (from center line of tractor) | 158" |
| Gearbox Protection | Relief Valve |
| Operation Up/Down | 85 Degrees/90 Degrees |
| Side Skirt | 10 Ga. x 9-1/4" |
| Deck Thickness | 10 Ga. |
| Hitch | CAT II-III Q.H. |
| Replaceable Skid Shoes | Std. |
| Safety Deflectors | Std. |
| Weight (Approx.) | 2140 lbs. |
|
Extra Equipment |
Optional Equipment |
|---|---|
|
|
RHINO guarantees each piece of Rhino equipment against defective materials and workmanship for a period of one year from the date of delivery to the purchaser unless otherwise specified. RHINO reserves the right to make changes and/or improvements in design and construction of parts or machines shown herein without notice or obligation.
Copyright 2004 RHINO, a member of the Alamo Group Company. RHINO is a registered trademark of Alamo Group, Inc. Terms of Service and Privacy Policy. RHINO; 1020 South Sangamon Ave., Gibson City, IL 60936; Phone 877-408-3297; Fax 877-408-3298